UNION TEE OD 3/8- 1/4 - 3/8 - HUT3/8-1/4-3/8G

Product Type: Union tee connector
Connection Dimensions: Main run 3/8 in × 3/8 in, side branch 1/4 in; all sizes refer to tube outside diameters
Color: Grey
Material: High-quality acetal plastic POM (polyoxymethylene)
Connection Mechanism: Push-to-connect at all three sockets
Operating Pressure: Up to 150 psi (pounds per square inch), approximately 10.3 bar, subject to the manufacturer’s size, temperature and tubing limits
Temperature Range: 0°C to +65°C
Applications: Water treatment systems, pneumatic circuits, auxiliary low-pressure desalination circuits, food and beverage equipment

Code: 01.00430

Availability: Available

Minimum quantity: 2 items

3.25€

/ Item

Wishlist

Compare products

Description

The HUT3/8-1/4-3/8G is a Fluid-fit union tee with main sockets for tube outside diameters of 3/8 in and 3/8 in, and a side branch for 1/4 in tubing. This arrangement connects a smaller branch perpendicular to the main line.

The body is made from acetal plastic POM (polyoxymethylene), with socket seals made from EPDM (ethylene propylene diene monomer rubber). Push-to-connect sockets allow the tubing to be fitted without tools. Each tube must have a clean, square-cut end and its outside diameter must match the corresponding socket exactly.

The operating range is 0°C to +65°C. The published maximum ceiling of 10.3 bar does not apply regardless of size and temperature: allowable pressure must follow the manufacturer’s rating table and the connected tubing limits. Disconnect only after the circuit has been fully depressurised. Depending on fluid compatibility and operating conditions, applications include: